Ravel Photoelectric Detector Smoke Analogue Addressable W/Base UL-Listed

Description

Addressable Smoke Detector
RE – 317 D SL
Overview
Addressable photoelectric smoke detector is designed to work with Avani Panel. These detectors are low profile and have dual LED’s, polarity free and 360° visual indication. The LED’s are blinking in normal operating condition whereas the steady state indicates fire status. It has an unique chamber designed to sense smoke produced by wide range of sources of combustion with insect free. The detectors sensitivity can be programmed through fire alarm control panel. It has a unique drift compensation where the detector adjusts its normal reference based on environment conditions.
UL listed and NFPA standard.
Polarity free, and Dual LED’s for 360° visibility.
Advanced detection and communication protocol.
Easy to install.
Sleek low‐profile housing design.
Regular 100 mm base.
Address set by 8 digit DIP switch.
Electrical Specification
Operating Voltage
17 ~ 28V DC.
Reset Voltage
Less than 3V.
Standby Current
500 μA.
Start up Time
30 sec.
Alarm Current
5 mA .
Remote Output
2mA maximum open collector.
Smoke Sensitivity
(2.12 ± 0.61) % obs/ ft (High: 1.1% obs/ft; Medium: 1.4% obs/ft; Low: 2.3% obs/ ft).
Air Velocity
0 – 4000 fpm.
Detector Spacing
9 meters.
Operating Temperature
-10° C to 37.8° C.
Storage Temperature
-10° C to 60° C.
Humidity
0 – 95% RH, non-condensing.
Mechanical Specification
Dimension
46 H x 100 D ( mm)
Weight
150 g with base
IP Rating
IP-42