SIMPLEX 4010-9819 FIBER MEDIA MODULE

Description

Simplex® Fire Alarm Network communications are available for wired or fiber optic connections:
-Wired communications are available on Network interface modules; available with either wired connections only, or as a modular design allowing selection of either wired or fiber optic media modules
-Fiber optic communications are available with fiber media modules on the Network interface modules or when using the higher performance multiple signal fiber optic modems
 Fiber optic links are point-to-point continuous (unswitched) connections between Fire Alarm Network nodes
 LED status indicators assist with system setup and servicing
Multiple communication signal modems use laser optical transmitters to provide:
 Increased transmission distances compared to copper
wiring (over 20 miles (32 km) may be possible with low-loss single-mode fiber)
 Designs are optimized for fiber type; models are selected for single mode fiber, or multi-mode fiber
 Multiple signal modems are two slot modules and are available with separate enclosures if required for smaller Network node control panels
Network modular interface modules provide:
 Class B or Class X communications using wired media or fiber optics; selectable separately to match media requirements
Wired media module details:
 Provides isolated earth detection
 Compatible with Simplex isolated loop and
overvoltage protectors
 Electrical characteristics are similar to RS-485
Network signal fiber optic media module:
 Fiber optic links provide immunity to electrical transients, short circuits, and ground conditions
 LED based fiber optic media module uses two multi-mode fibers to communicate; has type ST connectors, compatible with 62.5/125 or 50/125 fiber
 Bi-Directional Couplers are available to allow use of single fiber cable (for Network communications)
Multiple communications fiber optic modules provide:
 Laser based half-duplex communications over single fiber connections
 Available for single mode, or multi-mode fiber
 Refer to information summary on pages 2 and 3 and to data sheet S4100-0049 for additional feature